Jump to content

Recommended Posts

We have a 1.5 year old who climbs everything.  Literally spends all day trying to climb on stuff.  I've had enough, so today I built this.  Pretty proud of it considering I'm a novice at this type of stuff.  The biggest challenge we had was that there was no real way to gate off the stairs as you can see from the 3rd picture.  We had a gate that we slid back and forth between the bannisters, but he figured out how to move it so I had to find a way to block it off for good.  I built another gate just like this at the top of the stairs but didn't take any pictures.  I tied it down with zip locks (it's actually very sturdy for being so heavy) because I didn't want to put holes in anything and it needed to be easy to remove and put back.  We're expecting our 3rd son in a few months, so I figured it was worth it to spend the money to not have to deal with this again.  Built, stained, and mounted both gates from scratch in 1 day, not bad eh?

 

sll1mh.jpg

 

ephn9t.jpg

 

kdq3x0.jpg

  • Replies 13
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Looks really good. The Combat Engineer in me can't help but note the hinges are on the side that the 'enemy' is approaching from, as are the reinforcing slats that can be used as stairs to help gain purchase...but I'm reasonably sure your kids aren't going to have access to cutting tools and by the time they can heave themselves over will be old enough to not need the gate any more anyway.

 

One thing I would consider on a more serious note is putting something between the zip ties and the banister.  Even if it wiggles just a little with each opening it may be rough on the finish long term, sort of sawing through it.  A little bit of mole skin or something like that would remove that possibility.

Sometime this week I was planning on doing something like that I just didn't know what would be the best solution. I will be getting some of those felt stickers that you put on the bottom of furniture legs and putting them between the gate sides and the main banisters it's tied to to prevent rubbing. Not sure what mole skin is but I'll certainly look into it. I do need something there because those zip ties are tight as hell. They need to be because the gate weighs around 20 lbs and all the weight is on the left banister.

We wanted to make it high enough where he couldn't reach over and drop stuff and then get mad because he can't get to it (also why I only left a .25" gap btwn the boards so he couldn't put anything through it). He's nowhere near tall enough to reach the top so he shouldn't be able to grab anything to pull himself up on that bottom board. But of course the kid is a little ninja and has surprised us plenty of times. For now I think he's conceded defeat and doesn't mess with it. So far so good!

May I ask what it cost you to make? Granted our son is three weeks from being born and not worrying about climbing but I really enjoy the design.

i7 7700k, 16GB RAM, GEFORCE 1080, 240GB SSHD, 2TB SSD

I like it Mc....my only comment would be how long it will take him to try standing on the bottom step and working on the bolt?! If he tries to get past it, take a picture and post it in the thread :)

fa91d1c7-2525-4709-a13b-ae6fabba557e.jpg


Thanks to Capn_Underpants for the artwork

All in I spent $150 at Home Depot, but that also included a 2nd smaller gate at the top. The hardware, wood glue, and stain was $50 of that.

We put the bolt there for convenience as he's not tall enough to reach it yet. If it becomes a problem we can easily move it to the back side.

That is pretty sweet work and it suits your house.

Stairs are such a pain that it was one of the main reasons why i live in a bungalow.

Forum Signature Test.png

Apparently he IS tall enough to unlatch the bolt. That took all of one day for the little fucker to figure it out. I swear James Bond is our milkman.

I don't want to say I told you so but.....  :lol:  :lol:  :lol:  :lol:

fa91d1c7-2525-4709-a13b-ae6fabba557e.jpg


Thanks to Capn_Underpants for the artwork

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use and Privacy Policy